How to Replace a UPVC Door Replacement Lock

If your door lock is jammed or doesn't work as it should, you may need to replace it. The procedure may seem complex but it is actually quite simple and doesn't require the services of a locksmith.

Few basic tools, some patience and lots of care should be enough. Here's how to replace a lock on a upvc door:

Measure the Door

If you're having difficulty locking your uPVC door, or it won't close and lock, it's time to get a new lock. If you've recently moved into a new home, a tenant left without returning keys, or if your multipoint gearbox is showing signs of wear and tear, changing the barrel on your lock to a new one will provide an extra layer security.

Before buying a replacement lock, you'll need to take key measurements to ensure that the new lock fits properly and won't affect your home security. The most important one is the backset. This is the distance that lies between the middle of your keyhole bore hole and the edge of your door. It's usually around 2 3/8 or 2 3/4 inches. Take the length of the measurement using a measuring tape and note down the results.

You'll also have to know the faceplate's width. This is the thickness that the part covers the lock mechanism. If you can, purchase an alternative lock from the same manufacturer, as these will be made to the same dimensions. If you cannot find the manufacturers name or mark, just measure the width of your existing cylinder. You can also check this by putting a pencil in the keyhole and measuring from the bottom of the lock to the middle of the pencil mark on the opposite side of the cylinder.

Once you have the dimensions you can begin the process of removing the old cylinder. Start by loosening the screw that holds the handle in place with the Phillips-head screwdriver. Then, loosen the screws holding the interior and exterior handles together. After you have removed these screws, you can pull out the barrel screw on the handle's exterior to release the cylinder.

If the cylinder is stuck in the lock, try using WD-40 or another lubricant, to help you get it out. It is crucial not to push it out. Forcing it out can cause damage to the internal gearbox of your lock. Consider upgrading to a lock that comes with anti-snap and anti-bump protection. This will make it more resistant to attacks by thieves.

Source the Lock

If you're replacing an old lock after a break-in or upgrading for greater security There are some things to keep in mind when choosing a new door lock. To ensure the quality and fit make sure you purchase the right size cylinder and from a reputable manufacturer. You'll need some basic tools for the job including a screwdriver and a rubber mallet.

There are a variety of signs that your lock made of upvc is wearing out and must be replaced. The lock could have obvious damage, or the handle may be loose and not fitting correctly. If the lock starts jamming or doesn't lock at all it's time to think about the possibility of replacing it.

Once you've selected the perfect lock, it's important to install it correctly so that it works correctly and locks securely. Follow the manufacturer's directions to fix the new multipoint lock mechanism into the upvc door panel and to attach the correct handles and faceplates. Test the mechanism by locking the door and unlocking it from both the outside and inside. After you've completed the work, it's time for a celebration.

A door lock made of upvc may sound intimidating however, it's an simple DIY project that can be accomplished without the help of needing a locksmith. By recognizing the signs that your lock is ready for replacement and having all the right tools to hand it's relatively easy to complete.

Be aware that a lock made of upvc will benefit from lubrication as with any other part that moves. A few sprays of graphite powder can extend their lifespan by reducing excessive friction. Regularly cleaning your door's lock mechanisms with WD-40 and a damp cloth can help to keep them in top condition.

Remove the Cylinder

It may be time to replace upvc door lock the barrel of your lock in case you're experiencing issues with your door made of upvc. This is a simple DIY project that can be completed in a few minutes and is a great method to keep your home secure. The most important thing to remember is identifying the brand of the lock that you currently have to be able to locate a suitable replacement.

A damaged door lock could be a huge hassle and could pose a serious security risk. Locks on uPVC doors are susceptible to malfunction, so it's important that you maintain them regularly. In fact, experts suggest that you change your locks every seven years. However, if your lock is undergoing significant damage or you're not happy with its performance, it's certainly worth seeking help from an expert.

In the majority of cases, a pin-based system referred to as the euro cylinder is employed for uPVC doors. They are simple to use and seldom break down, but are still vulnerable. Therefore, it's worth replacing your lock cylinder with one that is more modern and has anti-snap and anti-bump security to stop burglaries.

The first step in changing your uPVC locks is to remove the handle. This will expose the old cylinder. It can be tricky because there are often screws hidden beneath the handles. Make sure you have a screwdriver in your bag. You'll need to gently tug and wiggle the cylinder until you loosen it. Once it loosens then you can pull it out of its socket.

If you find a replacement lock for upvc door that is suitable then simply screw it into place and reverse the removal process. Be cautious not to over tighten because this can cause the cylinder to become stuck in the door and stop working as it should. Once everything is in place, test the uPVC door replacement lock by opening and closing it both inside and outside. You should be able now to lock and unlock the door with your key. If you don't, check that the screws are tight and try again.

Install the Lock

Do some research to be sure the lock you choose is suitable for your patio door locks replacement. You'll be required to be aware of the faceplate and backset measurements - which is the distance from the edge of the door to the centre of the handle or cylinder and the type of lock you choose to ensure that the lock fits properly without compromising security.

After you've done this, it's now time to install the new lock. You should ideally open the door with a prop, or fix it in a way that it doesn't shut during the installation process. The first step is to loosen the screws that hold the handle in place using a Phillips-head screwdriver. After that, you should be able to slide the handle's inner and outer apart.

Now you can begin to remove the old cylinder. This is something you'll need to do by removing it from its barrel. After you have removed the cylinder, install the replacement lock. Make sure to adhere to the guidelines that correspond to the model you have. Once the lock is in place you can test it by opening and shutting the door from both the inside as well as the outside, then locking and unlocking it from inside, and then testing it again.

There are many reasons to consider to change the locks on your uPVC door. You might have recently moved in and haven't had an entry key. The previous tenant might not have returned the key. Or you might want to upgrade your lock to something more secure. Whatever the reason, changing the lock cylinder is simple and should only take about five minutes.

No matter if your uPVC doors are equipped with single-point or multipoint locks, they all share the same mechanism. This means they can be prone to problems occasionally like not being able to close or becoming stuck. They can be caused by wear and tear, weather conditions or simply due to everyday use. Most of these problems are easily solved with a bit of maintenance or by contacting locksmiths.