How to Replace a Saab 9-3 Key

The saab replacement key programming 9-3 has a great amount of appeal for drivers. It has a powerful engine and good visibility. It also has a high safety rating.

However, it's important to ensure that you have at least two keys that work for your vehicle. If you lose just one key, it could be very expensive to add another one.

How to replace the ignition Key on the Saab 9-3

If the car key won't start in the ignition and you want to replace it, you'll need to replace it. This guide will walk you through the steps to do it on a Saab 9-3. You'll have to replace the key, get another reprogrammable device, and then purchase a new casing for your key-fob.

The majority of modern Saab models utilize a transponder instead of a key made of metal to unlock the vehicle and allow it to start. The rechargeable batteries contained in the key-fob will eventually become worn out and aren't able to hold any charge. This is particularly the case if you use the same key with the same lock.

The good thing is that the battery can be replaced quite easily by an experienced locksmith. If you have the right tools and patience, you can do it yourself. The first step is to disassemble the key-fob from its case. Insert an open-ended head into the slot that is in the middle of your case. You will need to work slowly, as the plastic is very thin and can be damaged easily.

When the case is opened, you can prepare the new key by combining the lower part of the key that was used previously with the transponder and banana on the new key. This will ensure that the new key is connected to the CIM properly, which can make a huge difference when replacing the primary key for your saab 9-3 key fob replacement 9-3.

How do I replace the ignition Key in a Saab 900

If you don't have two keys, you will have to take off the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove the trim and dashboard pieces that surround the steering wheel. Once the dash is removed, you can insert a screwdriver into the opening at the back of the ignition switch and remove it.

The ignition cylinder is fitted with a key lock that could prevent the vehicle from starting if you don't have a key. If the ignition switch on your 900 isn't working, look at the key to see if it's in the lock or in the ignition barrel. You should also rotate your keys and keep them clean to prevent breaking.

Saab cars differ from other vehicles because they don't have traditional keys made of metal. Instead, the car recognizes electronic signals coming from the key fob through the use of a specific microchip.

If you have lost your only working key fob, the dealer will charge you the most expensive dollar for the replacement of the computer module (known as the CIM). We can reprogram the EEPROM of your computer to enable it to accept new keys without having to replace it. This can save you more than 50% of the cost the dealer charges! This is the SAAB Key PROGRAM. Learn more about it here!

How to replace the ignition Key on a Saab 9-5

The metal part of classic Saab keys is easy to duplicate and doesn't present a major threat to vehicle theft. The electronic component of the key-fob comes with a chip that can recognize the car when the key is put in the ignition switch.

Saab's anti-theft device has been relying on this technology for more than 10 years. It's not as effective as a physical door lock, but it makes stealing your car a lot harder. Every Saab owner needs to keep an extra saab 9-3 key fob programming key in their vehicle.

The majority of new Saabs come with two keys. However, they can be purchased from the dealer's expense using a handheld device known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 vehicles which are more modern and more advanced features that require an ignition key.

If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules and charge you an additional fee for it. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.

How do I replace the ignition Key in an XC90 Saab

It's possible to replace your SAAB key fob if you are having trouble turning the lock barrel. It's a simple process and you don't even need to visit a dealership. Instead, you can do it yourself at home with a few simple tools.

First, you'll need to prepare the keys for your new car. Before you begin, ensure that the anti-theft system is disabled by placing blocks on the rear wheels and releasing the handbrake. Then, you can put the key in the ignition and move it to the on position that activates the accessories but doesn't start the engine. Repeat this procedure five times and leave the key in the on position.

You'll then have to buy an additional case for your key fob. They are readily available at many auto parts stores and are usually very affordable. You can buy them without electronics depending on the model.

To open up the case, place a flathead screwdriver inside the slot in the middle. Gently work it. After you have split the case, you will have access to all of the internal electronics. To get rid of the electronics, use a small flathead screwdriver, and try to pry them out with a gentle force.