Double Glazed Door Lock Replacement

It can be difficult to replace a double-glazed door lock but it's not difficult with the right tools. Replacing your window lock will increase the energy efficiency of your office or home and will also add security.

Remove the screw that holds the retaining plate on the faceplate of the lock cylinder. Then use a screwdriver to twist it to the left before removing the cylinder.

Replacement Cylinders

Euro lock barrel locks or door cylinders are found in nearly all uPVC double glazed uPVC doors. They offer security and reliability and have been proven to function. Replacement of a cylinder can be required due to a key being stolen or lost, but also due to aging and the potential for corrosion. Our cylinders are available in a range of sizes, styles and finishes to suit your door. Depending on your requirements, you can choose between 3-star and 1-star cylinders that are secured by insurance endorsed Kitemarks from BSI.

Cylinder locks are built on simple pin and barrel locks that have been used for a number of years in the majority, if not all uPVC doors. The problem with these locks however is that burglars can easily manipulate them with tools that allow them to "snap" and gain entry into the home. We suggest that you replace your cylinders using snap-resistant cylinders in order to protect yourself from this common burglary method.

To take out the old cylinder, first of all open the door and locate the screw at the edge of the door between the handle that is outside and the inside handle. This screw will usually be distinct from the other screws as it's a different colour. With a screw driver, you can remove the screw completely. If the screw won't budge Try applying 3 in 1 oil and letting it sit for an hour. This might help, or you can chisel the head of the screw in the direction of 'unscrew' to shock it loose.

After removing the screws for the handle, loosen the cylinder by turning it either way (the direction will vary depending on which side of the door the locking mechanism is situated). Once the cylinder has been loosened, pull it towards you and remove it. Then measure the cylinders length and width to find a replacement.

We supply a wide range of standard type full and half cylinders, as well as a selection of security cylinders with specialized features that are both rated for anti-snap as well as anti-bump resistance. These cylinders are BSI kitemarked, Secured by Design certified and offer high levels of physical security for your home.

replacement locking mechanism for upvc doors handles

There are many colours and styles available when replacing handles on a uPVC door. But the most important thing is to ensure that the new handle fits correctly. The keyhole size and screw size will both have to be matched in addition. Use our handy guide to measure uPVC handles. This will ensure that you have the most accurate measurements and buy the correct handle. It's also worth considering upgrading to a high security set of handles. This will increase the security of your door and can help to stop potential thieves from being able access the locks on your uPVC front doors.

Most major uPVC handle manufacturers will have replacement upvc door locks handles for double glazed doors. Companies like ERA Avocet Millenco offer a variety of lever and lever-lever handles in different finishes. You can even pick the lever handle with a snib option for extra security.

Depending on what you need in the future, you may need to replace the entire handle or just the lever. Often this is because of wear and tear, but sometimes it can be caused by a fault with the lock mechanism. If your lock system is not working properly, it's best to contact a Locksmith. If you only need to replace upvc door lock mechanism the handle of the lock, you could do it yourself.

Once you've taken your measurements you can start to compare them with the dimensions of the replacement handles that are available on the market. The most commonly used size for uPVC door handles is the 92pz, however there are also 70pz and 68pz sizes. The new handle must also have a backset and a faceplate that is compatible. This will ensure that the screw holes are aligned properly and that the lock in the door isn't damaged.

If you're replacing A patio door lock your door handles and want to upgrade to a greater level of security, then it's recommended to consider Sold Secure SS301 or 2* Kitemark handle set. These handles are great since they've been approved by the police and they have anti-drilling as well as anti-picking features.

Faceplates for replacement

Door keeps and faceplates serve as the last line against burglars. They let burglars know that your home is safe, stopping them in their tracks. They are crucial and should be bought from a reputable hardware shop whether in person or online. This will allow you to make sure you're buying a quality device that lasts for a long time and protect your windows and doors from corrosion and damage over time.

It is also important to be aware of the distinctions between multipoint uPVC lock and single point lock, they could differ as much as apples and oranges. Depending on the type of lock you are installing you will need to choose the appropriate backset and faceplate, a "backset" is the distance between edge of the door and centre of handle or cylinder and a 'faceplate' is the metal strip that covers edges of the mechanisms. These are the key factors to determine which parts to replace for your new uPVC lock system. It's a process of following the directions for fitting them!

Replacement locks

Based on your preference There are a variety of options available when it's time to change the locks on your uPVC door. These locks are designed to withstand forces and provide greater security for your home. There are uPVC multipoint locking systems that are suitable for commercial use. These are usually supplied by reputable manufacturers, such as Fullex centre door lock gearboxes and Gardinia uPVC doors locks.

When selecting a replacement window lock, you must be aware of the kind of faceplate and backset you require. Ensure the new lock matches the existing ones to ensure it's safe and will fit properly. If your lock has a spindle of 35mm and a 35mm backset, it is advisable to purchase a new uPVC handle with a gearbox that fits, such as the Laird Saracen surelock.

It is also important to ensure that the new lock you choose matches the dimensions of the handle and faceplate holes on your existing windows. This is crucial to ensure an effortless integration between the handle and the window lock.

Once you have selected a replacement lock and you are ready to install it on your window. It is a good thing to talk to your local locksmith in this process. They will be able assist you in locating the appropriate lock. In the end, you must test the new lock to ensure it's working correctly.

To avoid this, replace your double-glazed windows by installing a lock of top quality that is resistant to forced entry. This will protect your valuables as well as keep your family safe from burglars. Installing new window locks is an affordable option that will enhance the security of your home. The process can be difficult when you're not experienced with the procedure. To complete the task with ease it is essential to be sure to follow these steps.