sliding patio door repair service near me Patio Doors Repairs

Your sliding patio doors can bring sunlight into your home and improve its energy efficiency. In time, they might start to show signs that suggest some attention.

Luckily, most of the problems with sliding patio doors are simple to address. Learn more about how to keep your patio doors looking and operating like new:.

Dirty or Damaged Tracks

One of the main causes of sliding patio doors that won't open is dirty or blocked tracks. Over time, the dust and grime of everyday usage accumulates on the tracks and can cause the door to become jammed or even fall apart completely.

This buildup can be reduced by incorporating regular light cleaning of sliding doors and tracks in your daily household chores. Begin by cleaning any large debris off the tracks and then wiping them down with warm water and a non-abrasive cleaner like dish soap. A little vinegar added to your cleaning solution can help in removing stubborn grease and dirt stains.

If you notice that your sliding door doesn't move smoothly after completing these steps, it may be the sign of more severe damage that requires professional repair or replacement. There are a few basic fixes you can make before calling a professional to avoid costly repairs or replacements.

It is important to put a doormat on the bottom of your sliding doors to help catch dirt before it has a chance to get to the tracks. Make sure to trim the plants and shrubs that are located near your sliding door to reduce the amount of debris tracked into the tracks. Close the door correctly to prevent damage to the rollers and wheels. You can extend the life of your doors by maintaining them clean and lubricated.

Misaligned Rollers

Occasionally, a sliding patio door becomes unbalanced or becomes stuck. Usually, this is due to obstructions such as dirt or other that can be easily removed. However, it could be due to a bent track or roller. In this instance, you can realign the rollers by taking them off with the adjustment screws and then cleaning with ruby alcohol. Be cautious when working with these parts, as they are delicate.

If your doors are still stuck then you could try lubricating the rollers to reduce friction and make it easier for them to slide. Choose a silicone-based lubricant, because petroleum-based lubricants may attract dirt more quickly. It is essential to clean the rollers and tracks prior to applying lubrication.

After cleaning the rollers you can reinstall using their adjustment screws. It is recommended to use the same lubricant you used when cleaning them. Make sure to push the rollers all the way into their channels when you reinstall them. You can then test your door to see whether it slides more effortlessly.

If the problem continues, it is possible to remove the door and check the tracks and rollers. If the wheels or tracks are bent badly, you may need to replace them. In this case, it's a good idea to contact a professional for the installation.

Warped Glass

Sliding glass door are great for bringing the outdoors into your home and letting natural light in, but they may also be prone to damage that needs repair or replacement. Some of the most common problems that arise are cracking, warping and fading. Warping occurs when the materials that make up your sliding glass patio sliding door repair near me door start to degrade as a result of exposure to sun, heat and other environmental elements. Cracks are usually caused by the impact of the impact of a lawnmowers blade or ball that is smashed into the door. Fading is usually due to repeated exposure to sunlight as well as other elements.

If your sliding glass patio doors are difficult to close or open it could indicate that their rollers and tracks aren't functioning properly. This could be due to accumulation of dirt, rust or debris in the track, misaligned wheels or a lack of lubrication. Cleaning the tracks and rollers clearing obstructions and applying silicone spray can aid in resolving this issue.

Another reason why your sliding patio doors might be difficult to open or close is because the locking mechanism has gone out of date. This could be caused by the alignment of the track or wear and tear however, a simple fix is to adjust the locking mechanism by turning the adjustment screws that are located at the bottom of the track.

Drafts or air leaks that surround your sliding patio door are a frequent issue that can affect the efficiency of your home's energy usage. They are usually caused by damaged weather stripping or poor alignment of the doors that can be easily corrected by replacing the weather stripping and re-aligning the doors.

Loose Handle

When a sliding door's handle becomes loose, it can be quite frustrating and cause it difficult for people to open the door. This issue is usually caused by an incorrectly aligned locking mechanism which can be corrected by loosening the screws that hold it in place and tightening them until they're snug against the door jamb.

A loose handle may be caused by the handle becoming detached from the spindle which connects it to the interior or handles outside. This usually happens as a result of a combination of factors, including over use, wear and tear, or just general ageing. If the problem is not addressed quickly, it could eventually lead to the entire handle becoming loose and possibly falling off completely.

The most effective way to address this issue is to start by finding the screws that connect the interior and exterior handles. The screws are typically hidden behind tabs of plastic that can be removed with a flathead (or a Phillips head screwdriver in certain instances) screwdriver. Store these screws safely to ensure they don't get lost.

After removing the old handles, the next step will be to take off the spindle. This can be done by tapping the end using a mallet or hammer until it comes loose from its position within the door. The new handle can be fitted by simply placing the spindle through the hole on the interior handle, and then inserting the other end of the spindle through the hole in the outside handle. Once the handle is in place it can be tightened by screwing the screws back in and then ensuring that the lock and unlock mechanisms work properly.

Afflicted Weatherstripping

A cracked or worn weatherstripping could let water and air get through your patio doors, which can compromise the comfort and energy efficiency of your home. In addition to letting in water, it can create drafts and also increase your heating or cooling costs. The good news is that replacing the weatherstripping is an easy repair that doesn't require professional assistance. The first step is to remove the old stripping by loosening its staples with an screwdriver or pinning it with a putty knife and then pulling it off the door. Then, you can clean the area and apply a fresh layer of weatherstripping that is backed by a foam seal to stop leaks and improve the comfort.

If your sliding patio door is not working as it should, you need to fix the issue as soon as possible to avoid further damage and keep them functional for many years to come. Depending on how serious the problem is and the severity of the issue, an DIY solution or a professional repair/replacement could be the best option.

The most common issues with sliding patio doors include filthy rollers caused by debris on the tracks, misaligned wheels and a loose handle. In the majority of cases these issues can be fixed with regular maintenance and cleaning, such as oiling the track tilt and slide patio door repairs rollers, as well as adjusting them and tightening the hardware. However, if these measures don't work, it's best consult a professional for advice to ensure that your patio door is operating just as it should. Before you decide to replace or repair your patio door, be sure to check its warranty information to ensure that it's covered by the manufacturer's warranty. This can save you money on repairs or replacements in the near future.