Sash Lock Door Handles

If you want to enhance the security of your home without compromising aesthetics, go for sash lock door handles. They can be used with a mortice latch or sash lock, and can be used in conjunction with a night latch to add security for doors that are internal.

These handles consist of a lever/handle mounted on the backplate. They are usually used with a three or five lever mortice lock. They can be combined with the tube latch.

Lever Lock Handles

There are many types of lever handles that will fit any style. Rustic lever latches work well with ranch or farmhouse style decor and are also very popular in modern homes. Classic lever handles are round or spherical and easy to grasp. They are easy to use and cost-effective and can be utilized in any decor. Select polished or satin nickel chrome handles for a classy appearance. These finishes are easy to clean and durable. Other options include antique bronze and polished brass. A lot of handles have decorative designs, such as amber worm-eyes, or long-horned cyrstals. Some feature the shape of a pin or star built into the bottom of the lever.

To change your lever lock door handles, first ensure you have the correct screwdriver or other tool to remove them. Depending on the design and model, you may need to make use of an awl or nail to remove the lever handle. Some lever handles have tiny holes or a notch at the base of the handle that can be used to pull them open.

Once you have the correct tool, follow the manufacturer's instructions to take off your old handles. Examine the spindle of your new lever. Existing doors are often morticed (cut into the door) for latches that were previously used or locks and must be fitted to a specific spindle size. The majority of lever handle manufacturers have a standardized door spindle size for handles.

If you are replacing the handle on a door with a sash lock the handle that was previously used must be removed, and the tubular latch bolt which is within the door, needs to be removed from the strike plate in the door frame. The latch bolt has to be inserted through a hole in the door's frame and connected to the strike plate.

It is important to remember that when you install the lever handle for the first time all handles that are compliant with the ADA (Americans with Disabilities Act), are designed to operate with a hand. The user shouldn't be required to grip their hands tightly or turn their wrists. To ensure that they be in compliance with ADA compliance standards, the lever door handle must be operated with the thumb and finger or the entire hand.

Sash Lock Handles

The primary purpose of sash lock door handles is to pull the sashes that are moving together tightly to create a seal. This helps to maintain the temperature inside the house and stops drafts. They are also ideal for doors that don't need the security of the keyed locking system.

Sash locks are also known as mortice sashlocks and combine a latch and dead bolt into one case fitted in the material of a door. They are often used in conjunction with door handles and come with a wide range of options.

Lever lock handle is a lever mounted on the backplate, which is cut off below, which allows the key to be inserted to open the mortice sash lock. It is most often used for non-locking doors like dining rooms and living rooms however it is also possible to pair it with a tubular latch on an internal door that is more secure.

They are designed to hold the sash window renovation together for multiple times and also have hooks that fit inside the keeper. They are available in a variety of styles and designs to fit into various types of windows, such as sliding or hinged casement windows. Some are made of cast aluminum while others are brass or wrought iron. These are available in various finishes to match the other elements of door furniture like escutcheons, which protect the keyhole.

3 lever sash window repair lock handles are suitable for doors that are internal but not for external doors, as they don't offer the security level required by insurance providers. They also have a lower resistance to forced entry, making them more vulnerable than their certificated 5 lever counterparts.

A door sash lock featuring 5 levers is a much better choice for doors that are outside because it provides higher levels of protection against forced entry and is harder to bypass or pick. These locks feature an upgraded design that's been tested and certified to meet the strictest security, fire and disability regulations.

The first step to replace the handle on a sash lock is to remove the old fastener by taking the screws from both ends. Make sure you have a screwdriver available and carefully separate the pieces so that you don't damage them. Mark with a pencil where the screw holes are, so you can align the new fastener correctly when it comes to fitting. Remove any dust or paint flecks, and then screw in the new fastener. It is important to test the handle to ensure it operates correctly and creates an effective seal.

Tubular Latch Handles

The tubular latch is a latch mechanism that is located inside a door, and can be operated by turning your handle. It is designed to close the door however, it doesn't lock the door as mortice locks would. They are most commonly used on internal doors, in which locking is not needed. They can be fitted with knob handles or levers.

There are many sizes of tubular latches available. They range from basic to the highest quality architectural quality. The dimensions of the door depend on its use and whether it comes with a lock. For example bathrooms may require the ability to turn a thumbturn and release in case of an emergency, so you'll need a lockable latch.

The backset of your door will influence the latch you choose. This is the distance between the edge of your door and the centre of the hole that is used for the door handle rose/knob and you should choose a latch with the same backset measurement. This will ensure your handle/door knobs are able to operate the latch without a hitch.

If you are fitting a spring or unsprung lever or door knob it is essential to choose a sturdy tubular latch with a secondary double glazing for sash windows-sprung follower and tongue. This will ensure a smooth and consistent latch action and will prevent it from becoming slow or unresponsive after prolonged use.

After you have chosen the appropriate latch to meet your needs The next step is to fit it onto the door. The first step is to make sure that the latch is aligned to the top of your door frame/casing. Note the location of the latch and drill holes. Countersink drill bits will aid in creating the proper recess to allow it to fit comfortably.

Once the latch is set Once it is in place, you can screw it to the door. Before installing your door handles or locks it is crucial to ensure that the latch is working correctly. To do this you need to open and close the door a few times. If it's not working correctly Try lubricating the door with WD40. Then re-try it. If you continue to experience issues, it could be necessary to consult a locksmith or professional installer.

Keyhole Handles

The keyhole handles are used with a tubular latch that is installed inside the door. This latch is used to open and close the door. When pushed down, the handle engages the latch, and when pulled up, it releases it, allowing the door to be opened. These types of handles are most often used on doors with internal openings such as living rooms and dining room doors but can also be used on front doors when paired with a nightlatch.

Door knobs are a contemporary type of handle that combines spring-loaded levers/handles on a square or round fixing rose with an accompanying thumb turn or escutcheon. They are available in a wide variety of styles and finishes to suit different doors around the home. They can be used in conjunction with Euro cylinders or multipoint locking systems to provide added security. This is accomplished by locking the door at various points along the length of the door. Door handles that are compatible with the lock must be fitted with the proper lock center dimension to accommodate the barrel.

Keyhole escutcheons cover the existing keyhole in the door to hide it and give the handle a more stylish appearance. They come in both a pop on or screw on style and are available in various finishes to match the door handle. A recessed escutcheon that is affixed to the edge of the door to hide the keyhole and give it a modern appearance, can also be utilized.

The majority of the handles mentioned above are designed to work with a mortice or the sash lock mechanism. However some are compatible with Euro cylinder locks as well. They are designed to secure uPVC door and require compatible handles with the Euro cylinder hole as well as screw holes in the backplate. These handles also require a Euro cylinder escutcheon or a standard escutcheon depending on the application.

If you decide to use mortice lock or a sash lock, or a tubular latch for your door, it's essential to understand the different features of each and the requirements they must meet to work with other components of your uPVC door system. You'll have to take into consideration the door thickness and door hinges, as well as frame reinforcements as well as the door handle backplate size, the dimensions of the lock centre and the screw centres for the cylinder.