Sash Lock Door Handles

If you want to enhance the security of your home, without compromising aesthetics choose sash lock door handles. They can be used with a mortice lock or sash lock, and are also able to be used with an nigh latch to provide additional security for your door.

The handles are made up of a handle/lever on the backplate. They are usually used with a three or five lever mortice lock. They can be used in conjunction with the tube latch.

Lever Lock Handles

There are many kinds of lever handles that can be matched to any decor. The rustic lever locks are very popular in both farmhouse and modern homes. Classic lever handles are round or spherical and are easy to hold. They are easy to use, inexpensive and fit in with any style of home design. Choose polished or satin nickel chrome handles to create a sophisticated style. These finishes are easy to clean and are durable. Other options include antique bronze as well as polished brass. A lot of handles feature a decorative design, like small amber worm eyes or long-horned crystals. Others feature a star or pin shape built into the bottom of the lever.

To replace the lever lock door handles first make sure you have the correct screwdriver or a tool to take them apart. You may require an awl, or a nail depending on the model and design. Some lever handles feature a small notch or hole at the bottom of the handle that can be used to pry them open.

Follow the manufacturer's instructions to remove your old handles when you have the right tool. Check the spindle of your new lever. Existing doors might have been morticed for previous latches and locks, that require a particular spindle. The majority of lever handle manufacturers have the same standard door spindle size for handles.

If you are replacing the handle of a secondary glazing sash windows lock the handle that was previously used must be removed, and the tubular latch bolt that is located in the door, must be disconnected from the strike plate that is in the door frame. The next step is to drill a hole in the door frame, then insert the latch bolt into it, and connect it to the strike plate in the door frame.

When installing a new lever door handle, it is important to note that all ADA (Americans with Disabilities Act) compatible handles are designed to be operated by hand and must not require users to grip tightly or twist their wrists. In order to comply with ADA standards of compliance, the lever door handle must be operated with the thumb and finger or the entire hand.

sash window repair near me Lock Handles

The main function of locks for sash is to seal the door by pulling the moving sashes tightly. This helps maintain the temperature of the home and prevents drafts. They are also ideal for doors that don't need the security of keys for locking systems.

Sash locks are often referred to as mortice sashlocks. They combine the latch and dead bolt into a case that is fitted to the surface of a door. They work in conjunction with doors with handles and there are a myriad of choices to suit your home.

The lever lock handle is operated by a lever with a hole cut in the backplate below. This allows a key inserted into the mortice sash to operate the lever. This lock is typically used on non-locking interior doors such as those in dining rooms and living rooms. However it can also be utilized with a tubular lock for an extra secure door.

These are designed to hold the sash in place for multiple times, and also have hooks that fit inside the keeper. These are available in a variety of styles and designs that fit different window types such as hinged or sliding casement windows. Some are made of cast aluminium, while others are made from brass, and even wrought iron. These are available in various finishes to match the other elements of door furniture like escutcheons, which protect the keyhole.

3 lever sash locks are suitable for internal doors however they are not suitable for external doors because they lack the level of security that insurance companies require. They also are less vulnerable to forced entry than their 5 lever counterparts, making them more vulnerable to attack.

A door sash that has five levers is the best option for external doors. It offers higher levels resistance to forced entry and is more difficult to pick or bypass. These locks are a new design that has been tested and certified for compliance with stringent building, fire and disability regulations.

To replace the handle of a sash lock take the old fastener from both ends by taking off the screws. Be sure to have a screwdriver available and carefully separate the pieces to avoid damaging them. Mark with a pencil where the screw holes are, so you can align the new fastener properly when it comes to fitting. Clean any paint or dust flecks, and then screw in the new fastener. Test the handle to ensure it works correctly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which sits inside a door and can be operated by turning your handle. It is designed to shut the door however it does not lock the door like mortice locks do. They are used most often on internal doors, where locking is not required. They can be equipped with lever or knob handles.

Tubular latches are available in different sizes. These range from economy through to high-end architectural quality. The dimensions of the door depend on its purpose and whether it has locks. If you need a thumbturn release mechanism for an emergency, then it is necessary to have a lockable latch.

The choice of the best latch depends on the backset size of your door. You will need to choose a latch that has a backset measurement that matches the distance between the edge and the center of your door's hole for the handle rose or knob. This will ensure your handle/door knobs are able to operate the latch with ease.

If you're installing a sprung or unsprung lever or door knob, it is crucial to select a heavy duty tubular latch with a double sprung follower and tongue. This will ensure a smooth latch action and prevent it becoming sluggish or unresponsive after prolonged use.

After you have chosen the correct latch for your requirements the next step is to attach it to the door. First, make sure the latch is level with the top of the door frame or casing by taking measurements and marking the position of the latch plate then drilling holes for it. Utilizing a countersink drill bit will aid in creating the correct recess for it to sit comfortably in.

After the latch has been installed, you can install it into the door. Before installing your locks or handles it is crucial to check that the latch is working properly. To do this you need to open and close the door a few times. If it's not working correctly try lubricating your door using WD40. Then re-try it. If you are still experiencing problems, it may be necessary to speak with an expert locksmith or installer.

Keyhole Handles

Keyhole handles are fitted with a tubular latch installed inside the door. The latch is used to open and shut the door. The handle engages the latch when it is pushed down and then releases it when pulled up. These kinds of handles are typically used on internal doors like living rooms and dining room doors but can also be fitted to front doors when paired with a nightlatch.

Door knobs are more modern handles that incorporate an sprung lever/handle, a round or square fixing stem and a matching thumb-turn or escutcheon. They are available in various designs and finishes that will fit the doors of your home. They are able to be used with Euro cylinders or multipoint locking systems to provide additional security. This is accomplished by putting several points of locking along the door height and requires door handles that are compatible with the right lock centre dimensions to fit the barrel of the cylinder.

Keyhole escutcheons cover the keyhole on the door to conceal it and give the handle a more stylish look. They come in both a pop on or screw on design and are available in a variety of finishes that match the door handle. A recessed escutcheon, that is affixed to the edge of the door to hide the keyhole more and give it a modern look, can also be used.

Most of the handles discussed above are designed to be used with either a mortice lock or the sash lock mechanism. However certain handles are compatible with Euro cylinder locks as well. These handles are suitable for uPVC doors and require compatible handles with a Euro cylinder hole and screw holes in the backplate. These handles may also require a Euro-cylinder escutcheon, or a standard escutcheon, depending on the application.

If you decide to use mortice lock, secondary glazing sash windows lock or tubular latch for your door, you need to understand the different features of each and the requirements they have to be compatible with the other components of your uPVC door system. You'll have to take into consideration the thickness of your door, door hinges and frame reinforcements, as well as the backplate of the door handle size, lock centre dimensions and the screw centres for the cylinder.