Caboose - A Very Small Wood Burner

The Caboose is an Ecodesign and DEFRA approved log burner, which is able to burn smokeless and wood. It can hold larger pieces of wood than most small stoves and boasts a long burning time and heat output.

The wood stove may be shielded by an heatshield to ensure compliance with Approved Building Document J, which stipulates that wood stoves should be kept at least 150mm away from surfaces that are combustible.

Clean Wood

Wood stoves aren't just beautiful to look at but they also serve as a fantastic source of heating for homes. Therefore, they have to be looked after properly to ensure that they operate smoothly and efficiently. This can be a little difficult particularly when it is about keeping the glass clean but a few simple steps can make a huge difference.

It is crucial to only burn wood that has been seasoned in your wood stove. This means that it should be cut and stored for at least one year prior to being used, as this will help reduce the amount of smoke. Burning unseasoned wood burning fires can cause the flue to overheat, which could lead to an uncontrollable fire that is out of control and creating the chimney to catch fire.

Only burn clean wood on your wood stove. Avoid burning paper or other non-wood products such as plastics or rubber, since they can emit toxic fumes which are bad for your health. Burning treated or painted wood may release harmful chemicals like arsenic that is harmful for your health.

It is also recommended to clean up the interior of your stove. You can do this easily by using a regular vacuum cleaner with a brush attachment. You can also buy several cleaners specifically designed to be used on stove glass. However it is crucial to ensure that any product you choose to use will not void the warranty of your stove prior to using it.

It is also crucial to inspect the fire rope seals on the top and the bottom of your wood stove. These seals stop smoke or soot escaping from the stove. It is crucial that they are firmly installed and not damaged.

Last but not least, you should remove any birds who have landed on your chimney. Seagulls are a particular problem and will often perch on chimneys throughout the summer months, leading to all sorts of debris falling in the flue that could cause damage to your stove. There are a number of different bird guards and spikes available on the market that can be fitted to your chimney to prevent this from happening.

Paper Burning

Burning paper is an easy method to get an fire going, however the wrong type of paper can cause dangerous smoke. Certain types of paper like glossy magazines and giftwrap, contain harmful chemicals that emit toxic fumes when they burn. Burn only clean paper in your wood stove to avoid creating a dangerous environment.

If you have only some pieces of paper to burn, think about using the tub. Place a stack of papers over a tub, and then light one corner. The water will capture any embers that fall, and prevent them from catching the trees or grass that are on fire. If you're worried about the smell, you can put baking soda or vinegar around to neutralize the smell.

Start with a base made of small twigs or newspaper that has been shredded. This will ensure that the paper burns properly. Add 3-4 medium-sized wood logs, and let them burn. Next, layer the paper on top of the fire. The paper will burn fast, so you should monitor the fire closely.

It is an ideal idea to pick a day that is wind-free to burn papers outdoors. A strong wind gust can send embers into your home or in the grass. In addition, the smoke from burning papers can cause breathing problems if it is inhaled.

You can also make use of the BBQ grill to burn paper, however this method is ideal when you only have just a few sheets of paper to burn. If you have a removable metal grilling surface, you can take it off and use it to burn the paper directly onto the charcoal.

Before you start burning paper, be sure your wood burner has been thoroughly tested and the fire pit has been cleared of all twigs and branches. It is also a good idea to keep a fire extinguisher within reach in case of emergency. Also, check with your county government as well as your homeowner's association to confirm that it is legal to burn paper outside in your area.

Safety Precautions

Wood burning stoves can be fantastic sources of enjoyment and comfort, but only if you use them safely. It may seem obvious to others, but the truth is that a lot of people do not follow basic safety guidelines.

Make sure that your stove is properly insulated and any flue pipes that run outside are adequately protected. Also, ensure that pets and children are kept away from the stove.

Check that any paper or trash is not left in the woodburning fireplace. The burning of these items could cause the chimney and fireplace to overheat. They can also create creosote, which is a fire hazard that needs to be maintained regularly.

Check that the smoke alarms are in good working order and test them monthly. Installing carbon monoxide detectors can also save lives. They are also inexpensive.

Always keep a fire extinguisher in reach in the event of an emergency. Never create a huge stack of logs. Only burn dry wood that has been seasoned and dry. Burning a large wood burner pile of logs causes incomplete combustion and increases CO emissions. It is also essential to monitor the fire and if it grows out of control, put it out it immediately.

After you've used your stove, make sure the fire has been put out and that all combustible materials have been removed from the area around the fireboxes and flue pipes. There are specific clearance requirements that will depend on the stove's model and also on the method you intend to install it within your home.

Consider using a DEFRA approved model if you are planning to install your wood-burning stove in a controlled area. These stoves have been specifically designed to work in smoke-controlled areas. They are available in a variety of sizes and colours. Some models can even be customised to your specific design and come with direct air intake for improved performance in areas with smoke control.

Installation

Wood stoves can be used to heat small areas. They can be found in yurts, sheds, and even cabins. They also provide a warm and cozy fire without the use of electricity or oil. It is essential to follow the installation instructions provided by the manufacturer in order to set up your wood stove in a safe and efficient manner. These guidelines can help you avoid risky issues, and ensure that your stove is safe to use.

Before installing your stove, clear the area around it of any combustible material. Also, make sure that you have at least 16" of space between the stove and the nearest combustible wall. If you do not meet these requirements then a stove board or hearth pad could be put in place. This non-combustible mat will come with spacers of 1" to allow the stove to sit further away from the walls, which can reduce clearance requirements by up to 66%.

It is also recommended to remove combustibles like curtains and furniture to stop smoke from entering the room. Additionally, you should install a carbon monoxide alarm and smoke alarm in your shed. Additionally, you should ensure there is sufficient ventilation in the shed. It is essential to regularly inspect your stove to ensure safety.

It is recommended to buy wood stoves that are EPA certified. This means that the stove is more than 75% efficient. It means it will absorb and convert a higher amount of heat produced by the wood. You should also choose your wood stove according to the recommended heating capacity of the room in which it will be installed. This will prevent you from overloading your wood stove, which could lead to smokeouts and creosote.

After you have cleared out the space and removed all combustible materials then you must make the foundations of your stove. This includes the removal of all combustible objects and making the hearth ready. Also, you should check for any existing vents to make sure they are open and small Wood burner clear. You'll need to install vents if they aren't functioning properly.

After you have set up your stove, you should test its performance by lighting three or four small fires. This will cure the paint and bricks that are on your stove and ensure that you can safely ignite large flames.